• <th id="atg4w"><track id="atg4w"></track></th><rp id="atg4w"><acronym id="atg4w"></acronym></rp>

      1. <th id="atg4w"></th>

        <em id="atg4w"></em>

        Welcome: Shijiazhuang Chuangli Coal Mine Machinery Manufacturing Co., Ltd
        Language: Chinese ∷  English

        Pneumatic bolt drill

        • MQT-130 / 3.2 pneumatic bolt drill
        MQT-130 / 3.2 pneumatic bolt drill

        MQT-130 / 3.2 pneumatic bolt drill

        • Product ID:1060991967
        • Shooting Angle: 130 degrees
        • Video pixel:1920*1080
        • Shelf time:2018-10-10 13:09:30
        • Product description: MQT-130 / 3.2 Pneumatic Anchor Drilling Rig is developed based on the mature technology of advanced drilling rig, combined with the actual use environment and requirements of coal mines in China.
        • INQUIRY
        MQT-130 / 3.2 Pneumatic Anchor Drilling Rig is developed based on the mature technology of advanced drilling rigs, combined with the actual use environment and requirements of coal mines in China. It can be widely used in coal, semi-coal rock roadway, rock roadway and underground engineering with rock hardness coefficient f≤8, 9, 10, especially suitable for the support operation of coal roadway bolts, anchor cables, etc. It can drill roof bolt holes It can also drill the anchor cable hole on the roof, and can also be used as the anchor and anchor mixing and installation equipment for resin rolls. It does not require other auxiliary equipment, and the nut is tightened to meet the requirements of the initial anchor pretension.

        This rig has the following characteristics:

        1. The outrigger is made of glass fiber reinforced plastic, with compact structure, small volume, light weight and convenient use;

        2. The machine has high power, large torque, large thrust, low gas consumption and high drilling efficiency.

        3. Wide range of application, this rig is divided into three types: Ⅰ, Ⅱ and Ⅲ according to the roadway adapting to different section heights. Type Ⅰ is suitable for roadways with a height of 2 to 2.5 meters, Type Ⅱ is suitable for roadways with a height of 2.3 to 3 meters, and Type Ⅲ is suitable for roadways with a height of 2.5 to 3.6 meters. The roadway beyond the above height can be solved by special way of digging down pits or coal cushion or customized drilling rig of special height.

        The output connection size of the machine is: six sides within 19, six sides within 22, the standard configuration is six sides within 19, and other connection sizes need to be specified when ordering.

        The drill pipe that this machine can match: the hexagonal drill pipe that meets the above connection dimensions.

        Table of basic performance parameters of MQT-130 / 3.2 pneumatic bolt drill

        Number

        Basic parameters

        Unit

        Parameters

        1

        Working pressure

        MPa

        0.4~6.3

        2

        Preset pressure

        MPa

        0.50

        3

        Rated torque

        N·m

        130

        4

        Rated speed

        r/min

        240

        5

        Air consumption

        m3/min

        4.5

        6

        Maximum output power

        kW

        3.2

        7

        Power stall torque

        N·m

        190

        8

        Maximum load torque

        N·m

        170

        9

        Dynamic starting torque

        N·m

        180

        10

        Propulsion

        Level 1

        kN

        8.0

        Level 2

        6.0

        Level 3

        4.5

        11

        Noise

        Sound pressure level

        dB(A)

        ≤95



        Sound power level

        dB(A)


        ≤112


        12

        Outrigger specifications



        13

        Advance the trip

        Level 1

        mm

        450

        570

        707

        Level 2

        mm

        450

        560

        710

        Level 3

        mm

        465

        575

        718

        14

        Maximum height of the whole machine

        mm

        2565

        3015

        3585

        15

        Minimum height of the whole machine

        mm

        1200

        1310

        1450

        16

        Machine weight

        52

        53

        55

        17

        Flushing water pressure

        MPa

        0.6~1.2

        18

        Drill tail size

        mm

        19 Inner six parties、22 Inner six parties

        无码人妻精品一区二区三区66|97久久久精品国产片|亚洲综合无码AV在线观看|久久久亚洲一区二区三区四区

      2. <th id="atg4w"><track id="atg4w"></track></th><rp id="atg4w"><acronym id="atg4w"></acronym></rp>

          1. <th id="atg4w"></th>

            <em id="atg4w"></em>